The ICOM IC-2300H, 144MHz mobile, retains the same basic features from the popular IC-2200H; powerful 65W output power, simple-to-use user interface, built-in CTCSS and DTCS encoder/decoder, etc. While keeping those basic features, the IC-2300H is packed in to a smaller body (in depth) than the IC-2200H.

Output Power
65W, 25W, 10W, 5W
RX Frequencies:
144-148MHz
Memory Channels:
207 (includes 6 scan edges & 1 call)
Simple Operation

Panel Layout

The IC-2300H’s basic panel layout includes a simple user interface. A large LCD with 6 alphanumeric characters offers a good viewing angle for mobile operation. Select either the amber, yellow or green backlight color. The bottom of the display indicates the available front panel functions.

Built Tough

Rough roads won’t stop the IC-2300H from working. This mobile has been tested to and has passed the latest MIL-STD 810 G specifications including shock, vibration and temperature tests. The rugged aluminum diecast chassis provides effective heat dissipation and keeps RF output even during high duty cycle continuous transmission.

Multiple Scan Functions

The IC-2300H supports various scan types for maximum reception to suit your needs. The DMS (Dynamic Memory Scan) system allows you to scan selected banks from 10 memory banks by simply adding and deleting bank links.

Full scan

Programmed scan

Memory scan

Bank scan

Bank link scan (DMS)

Skip scan

Priority scan

Tone scan



Additional Features

Built-in CTCSS and DTCS encoder/decoder for quiet standby and repeater access

Power supply voltage display

4.5W (typical) loud audio

Reduced depth dimensions

DTMF autodial

Time-out timer



Specifications

General
Frequency coverage
TX
RX 144–148MHz
136–174MHz
Mode F2D, F3E
No. of memory channels 207 (including 6 scan edges and 1 call)
Frequency resolution 5, 6.25, 10, 12.5, 15, 20, 25, 30, 50kHz
Operating temp. range –20°C to +60°C;
14°F to +140°F;

Frequency stability ±3ppm (–10°C to +60°)
Power supply requirement: 13.8V DC ±15%
Current drain (at 7.4V DC):
Transmit at 65W

Receive Stand-by

Receive Max. audio

11A0.4A1.5A
Antenna impedance 50Ω (SO-239)
Dimensions (W×H×D)
(projections not included) 140×1.57×162 mm; 5.51×1.57×6.38 in
Weight (approx.) 1Kg; 2.43lb
Transmitter
Modulation system Variable Reactance
Output power 65/25/10/5W
Spurious emissions Less than –60dBc (High, Mid)
Max. deviation ±5.0/2.5 kHz wine/narrow)
Microphone impedance 60Ω (8-pin modular)
Receiver
Receiver system Double superheterodyne
Intermediate frequency 46.35MHz/450kHz (1st/2nd)
Sensitivity Less than 0.18μV at 12dB SINAD
Squelch Sensitivity Less than 0.13μV at threshold
Selectivity
Wide

Narrow

More than ±6kHz/6dBMore than ±14kHz/60dBMore than ±3kHz/6dBMore than ±9kHz/55dB
Spurious rejection More than 60dB
Audio Output Power 4.5W (typ.)
External speaker connector 2-conductor 3.5(d) mm 1/8″/4Ω
Applicable U.S. Military Specifications

Standard MIL 810 G
Method Procedure
Low Pressure 500.5 I, II
High Tempurature 501.5 I, II
Low Tempurature 502.5 I, II
Tempurature Shock 503.5 I-B
Solar Radiation 505.5 I
Vibration 514.6 I
Shock 516.6 I, IV
All stated specifications are subject to change without notice or obligation.

Supplied Accessories

Hand microphone, HM-133V

DC power cable, OPC-1132

Mounting bracket kit

Microphone hanger and spare fuses